TRIAXIAL TEST SET ASTM D-2850

*The triaxial test set provides test load up to 300 kgf at any speed from 0.00 to 3.00 per minutes. This features provides the capability for use in application such as constant rate of load and constant rate of stress.
*The unit incorporates :
*Triaxial Compression Machine : CD or UU & CU, capacity 300 kgf, loading speed 0.00 to 3.00 mm per minute, cell (speciment) size 35mm and 50mm maximum, Control power on-off switch, fast advanced selector swith. Variable speed, hand-operated and motorized operated with electric consumption 220V AC/ 200 W
*Load Measuring : Load ring 300 kgf capacity, Calibration & certified KAN LK-011-IDN
*Displacement Measuring : dial gauge 30 mm x 0,01mm
*Panel Control Consist of :
Measuring Pore Pressure : 10 Kg/Cm (Digital reading for pore pressure value)
Measuring Cell Pressure : 10 Kg/Cm (Manometer), Calibration & certified KAN LK-011-IDN
Measuring Back Pressure : 10 Kg/Cm (Manometer), Calibration & certified KAN LK-011-IDN
Burrete : for measuring pore pressure
Top Water Tank : plastic, 3 litre capacity
Buttom Water Tank : stainless steel, 5 litre capacity
Vacuum Tank : Stainless steel tank
*Triaxial Cells (Cell Chamber) Consist of :
Chamber : Made of non corrosive material and acrylic transparant.
Sample Pad : for 35 mm diameter specimen
Sample Pad : for 50 mm diameter specimen
*Constant Pressure Consist of :
Air Regulator : for cell pressure
Air Regulator : for back pressure
*Compressor Unit : compressor pump 0-10 Kg/ cm
*Vacuum Unit : vacuum pump 0-70 cm Hg, rotary type, 220 V-AC, 1/2 HP, 1 Phase
*Placing Tool : O-ring, 50 mm diameter
*Placing Tool : O-ring, 35 mm diameter
*Suction Membrane Device : stainless steel, 50 mm diameter
*Suction Membrane Device : stainless steel, 35 mm diameter
*Two Ways Split Former : 50 mm diameter
*Two Ways Split Former : 35 mm diameter
*Sample Tube : stainless steel tube, 50 mm diameter
*Sample Tube : stainless steel tube, 35 mm diameter
*Membrane : rubber, 50 mm diameter
*Membrane : rubber, 35 mm diameter
*Membrane Sealing Ring : ring rubber, 50 mm diameter
*Membrane Sealing Ring : ring rubber, 35 mm diameter
*Overall dimension : 200 x 80 x 180 cm/ Gross weight : 195 Kg
*Standard supply with instruction manual books

ELECTRIC DIRECT SHEAR TEST SET (ASTM D-3080/AASHTO T-236)

For determining shearing resistance of soil sample
Consist of :
Loading Machine
Consist of :
*Electric shear Machine : Welded steel frame, electric 220V, 200 Watt, 50, Hz 25 speed gear box 0.00 to 1.2 mm/ minute
*Loading Hanger : Machine steel, galvanized, supplied, without load
*Shear Box : Cast alumunium box, 63.5 mm sample diameter, porous stone, loading capacity
*Loads : Slotted, machine steel, galvanized
Consist of :
*Load : 3167 gr weight
*Load : 6334 gr weight
*Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder
*Proving Ring : 100 kg capacity (Calibration & certified KAN LK-011-IDN)
*Dial Indicator : Range 10mm x 0.01mm
*Dial Indicator : Range 20mm x 0.01mm
*Wire Saw : 10 cm length approx
*Dimension (l x w x h) : 130 x 25 x 130 cm/ Gross Weight : 125 Kg
*Standard supply with instruction manual books

CONSOLIDATION TEST SET (ASTM D-2435/AASHTO T-216)

For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loaded and drained axially
Consist of :
Consolidation Frame
Consist of :
*Frame : Cast alumunium, two test unit
*Loading set : Three alternative lever arm 1:9, 1:10, 1:11
*Consolidometer : Brass, 50.5 mm sample dia., porous stone,loading capacity.
Loads :
Consist of :
*Loads : 500 gr weight
*Loads : 1000 gr weight
*Loads : 2000 gr weight
*Loads : 4000 gr weight
*Loads : 4000 gr weight
*Sample Tube : Machine steel, 50.5 mm dia.galvanized, with extruder
*Dial Indicator : Range 10 mm x 0.01 mm
*Wire Saw : 10 cm length approx
*Dimension (l x w x h) : 80 x 80 x 150 cm/ Gross weight : 130 Kg
*Standard supply with instruction manual books

DIRECT SHEAR TEST SET (Hand Operated) (ASTM D-3080/AASHTO T-236)

For determining shearing resistance of soil sample
Consist of :
Loading Machine
Consist of :
*Frame : Welded steel frame, hand operated gear box, 100 kg cap
*Loading Hanger : Machine steel, galvanized, supplied without load
*Shear Box : Cast alumunium box, 63.5 mm sample diameter, porous stone, loading capacity.
*Loads : Slotted, machine steel, galvanized
Consist of :
*Load : 3167 gr weight
*Load : 6334 gr weight
*Sample Tube : Machine steel, 63.5 mm diameter, galvanized, with extruder
*Proving Ring : 100 kg capacity (Calibration & certified KAN LK-011-IDN)
*Dial Indicator : Range 10mm x 0.01mm
*Dial Indicator : Range 20mm x 0.01mm
*Wire Saw : 10 cm length approx
*Dimension (l x w x h) : 130 x 20 x 130 cm/ Gross Weight : 125 Kg
*Standard supply with instruction manual books

UNCONFINED COMPRESSION MACHINE (Electric) (ASTM D-2166/AASHTO T-208/SNI 03-3638-1994)

For determining stress strain relationship of cohessive soil without confining pressure
Consist of :
*Unconfined Compression Machine  : Electric, 220V-AC, 200 W, variable speed, adjustable height
*Sample Tubes     
Consist of :
Sample Tubes : 35.0 mm dia x 70 mm height
Sample Tubes : 47.5 mm dia x 95 mm height
Sample Tubes : 70.0 mm dia x 140 mm height
*Split Sample Tubes :
Consist of :
Split Sample Tubes : 35.0 mm dia x 70 mm height
Split Sample Tubes : 47.5 mm dia x 95 mm height
Split Sample Tubes : 70.0 mm dia x 140 mm height
*Sample Extruder :
Extruder : 34.5 mm dia x 71 mm height
Extruder : 47.0 mm dia x 96 mm height
Extruder : 69.5 mm dia x 141 mm height
*Trimmer : Steel frame, 3 tubes size
*Proving Ring : 100 kg capacity, (Calibration & certified KAN LK-011-IDN)
*Dial Indicator : Range 30 mm x 0.01 mm
*Thin Box : Alumunium, 60 gr capacity
*Wire Saw : 10 cm length approx
*Dimension (l x w x h) : 80 x 40 x 40 cm/ Gross weight : 60 Kg
*Standard supply with instruction manual books

UNCONFINED COMPRESSION MACHINE (Hand Operated) (ASTM D-2166/AASHTO T-208/SNI 03-3638-1994)

For determining stress strain relationship of cohessive soil without confining pressure
Consist of :
*Unconfined Compression Machine  : Cast alumunium, gear box, adjustable height of top platen, hand operated 200 kg capacity
*Sample Tubes     
Consist of :
Sample Tubes : 35.0 mm dia x 70 mm height
Sample Tubes : 47.5 mm dia x 95 mm height
Sample Tubes : 70.0 mm dia x 140 mm height
*Split Sample Tubes :
Consist of :
Split Sample Tubes : 35.0 mm dia x 70 mm height
Split Sample Tubes : 47.5 mm dia x 95 mm height
Split Sample Tubes : 70.0 mm dia x 140 mm height
*Sample Extruder :
Extruder : 34.5 mm dia x 71 mm height
Extruder : 47.0 mm dia x 96 mm height
Extruder : 69.5 mm dia x 141 mm height
*Trimmer : Steel frame, 3 tubes size
*Proving Ring : 100 kg capacity, (Calibration & certified KAN LK-011-IDN)
*Dial Indicator : Range 30 mm x 0.01 mm
*Thin Box : Alumunium, 60 gr capacity
*Wire Saw : 10 cm length approx
*Dimension (l x w x h) : 80 x 40 x 40 cm/ Gross weight : 50 Kg
*Standard supply with instruction manual books

MOISTURE CONTENT TEST SET

For determining moisture content of soil sample
Consist of :
* Cent O-Gram Balance :
- 311 gr capacity x 0.01 gr readability
- Front beam : 1g x 0.01g ; second beam : 10g x 1g
- Third beam : 100g x 10g;  rear beam : 200g x 100g
* Drying Oven :
- 53 litre capacity ; natural air circulation, temperature
- Stainless steel interior (w x h x d) = 400 x 400 x 330 mm
- Stainless steel exterior (w x h x d) = 550 x 680 x 480 mm
- from +30 °C (however, at least 5 °C above ambient) up to +220 °C
- Precission (at 100°C) with mech/electr control = ± 1,0/0,5°C
- Electric load (during heating) approx = 1400 Watt
*Thin Box : Alumunium, 60 gr capacity
*Dessicator : Transparent glass, 24 cm diameter approx non vacuum type, supplied with silica gel
*Dimension (l x w x h) : 80 x 80 x 90 Cm/ Gross weight : 70 Kg
*Standard supply with instruction manual books

SAND CONE TEST SET (ASTM D-1556/AASHTO T-191, According Standard R-SNI 2828 :2008)

For determining the density of compacted soil in place
Consist of :
*Sand Cone Bottle : Plastic, 4 ltr. capacity. Approx
*Sand Cone Funnel : Seamless metal, turning stopper, 6 1/2" diameter bottom, 1/2 neck diameter
*Base Plate : Cast alumunium, 12" x 12"
*Graduated Sand : Uncemented sand, passing # 10, retained # 60, 25 kg cap
*Sample Can : Round can, tinned metal
*Scoop : Cast alumunium, large size, round buttom.
*Spoon : Stainless steel, large size
*Trowel : Pointed type, wooden handle
*Chisel : Hardened steel, 30 cm length
*Rubber Mallet  : Rubber head, 0.5 Kg weight, wooden handle
*Dimension (l x w x h): 70 x 50 x 50 cm / Gross weight:  50 kg
*Standard supply with instruction manual books

SPEEDY MOISTURE TESTER (c/w Digital Balance) (AASHTO T-217; SNI 03-1965.1-2000)

For determining the moisture content of soil by means of calcium carbide gas pressure meter
Consist of :
*Speedy Gauge : M/C range 0-20 %, sens. : 0.2 %, sample  weight 20 gr
*Speedy Balance : Digital 200 gr capacity x 0.1 gr sensitivity
*Calcium Carbide;  : Reagent absorbent, CaC₂ calcium carbide
*Measuring Spoon : Cast alumunium
*Crushing Ball : Steel ball, 31,7 mm diameter
*Cleaning Brush : Plastic brush/ plastic holder
*Carrying Case : Wooden case with handle
*Dimension (l x w x h): 45 x 45 x 30 cm / Gross Weight: 15 Kg
*Standard supply with instruction manual books

COMPACTION PERMEAMETER TEST SET

For determining coeffisient of permeability of compacted soil sample.
Consist of :
*Compaction Permeameter : 1/33.33 cu. ft. mold , 6 inch i.d, inlet-outlet connector, overflow valve, porous stone.
*Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter)
*Graduated Cylinder : Glass made, 100 ml capacity, single numbering
*Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
*Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
*Standard supply with instruction manual books

COMPACTION PERMEAMETER TEST SET

For determining coeffisient of permeability of compacted soil sample.
Consist of :
*Compaction Permeameter : 1/30 cu. ft. mold , 4 inch i.d, inlet-outlet connector, overflow valve, porous stone.
*Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter)
*Graduated Cylinder : Glass made,100 ml capacity,single numbering
*Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
*Dimension (l x w x h) : 30 x 30 x 50 cm/ Gross weight : 30 Kg
*Standard supply with instruction manual books

COMBINATION PERMEAMETER (Constant head & Falling head testing methode) (ASTM D-2434/AASHTO T-215)

For determining coeffisient of permeability of compacted soil sample
Consist of :
*Sample Chamber : Transparent fibre glass, 2 1/2" i.d, 8" height, compessive spring, cast,alumunium body
*Funnel : Plastic, wide mouth, with over flow
*Frame : Alumunium frame
*Porous Stone : 2 1/2" diameter
*Burette : 50 ml capacity
*Graduated Cylinder : Glass made,100 ml capacity,single numbering
*Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
*Dimension (l x w x h) : 110 x 40 x 30 cm/ Gross weight : 10 Kg
*Standard supply with instruction manual books

LABORATORY CBR TEST SET (Hand Operated) ASTM D-1883 / AASHTO T-193; According SNI 03-1744-1989

For determining the bearing ratio of soil.
*Mechanical Loading Machine : Steel frame, hand operated, two speed, 10.000 lbs capacity 1.954" piston diameter
*CBR Mold : Machine steel, 6" i.d, 7" height, 2" height of collar
*Spacer Dish : Machine steel, 5 15/16" diameter, 2.416" height
*Cutting Edge : Machine steel, sharp edge
*Circular Surcharge Weight : Machine steel, 5 7/8" o.d, 2 1/8" i.d, 5 lbs weight
*Slotted Surcharge Weight : machine steel, 5 7/8" o.d, 2 1/8" slotted width, 5 lbs weight
*Swell plate : Alumunium with adjustable stem
*Swell Tripod : Alumunium for mounting sweel dial gauge
*Modified Proctor Hammer : machine steel, plated, 2" dia, 18" drop height, 10 lbs weight
*Filter Paper : 6 inch diameter., 100 sheets/ box
*Proving Ring : 6.000 lbs capacity, Calibration & certified KAN LK-011-IDN
*Dial Indicator : Measuring range 0.01" x 1"
*Swell Dial Penetration : Range 30 mm x 0.01 mm
*Square Pan : Galvanized steel, 65 x 65 x 7.5 cm
*Thin Box : Alumunium, 60 gr capacity
*Graduated Cylinder : Plastic made, 1000 ml capacity, single numbering
*Scoop : Cast alumunium, large size, round buttom.
*Trowel : Pointed type, wooden handle.
*Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
*Dimension (l x w x h) : 110 x 70 x 70 cm/ Gross weight : 200 Kg
*Standard supply with instruction manual books

LABORATORY CBR TEST SET (Electric) (ASTM D-1883/AASHTO T-193; According SNI 03-1744-1989 )

For determining the bearing ratio of soil
Consist of :
*Electrical Loading Machine : Electric, 220 V-AC, 1/2 HP, 1 Phase, speed 0.05"/min reversing switch 10.000 lbs capacity
*CBR Mold : Machine steel, 6" i.d, 7" height, 2" height of collar
*Spacer Dish : Machine steel, 5 15/16" diameter, 2.416" height
*Cutting Edge : Machine steel, sharp edge
*Circular Surcharge Weight : Machine steel, 5 7/8" o.d, 2 1/8" i.d, 5 lbs weight
*Slotted Surcharge Weight  : machine steel, 5 7/8" o.d, 2 1/8" slotted width, 5 lbs weight
*Swell plate : Alumunium with adjustable stem
*Swell Tripod : Alumunium for mounting sweel dial gauge 
*Modified Proctor Hammer : machine steel, plated, 2" dia, 18" drop height, 10 lbs weight.
*Filter Paper : 6 inch diameter., 100 sheets/ box
*Proving Ring : 6.000 lbs capacity, Calibration & certified KAN LK-011-IDN
*Dial Indicator : Measuring range 0.01" x 1"
*Swell Dial Penetration : Range 30 mm x 0.01 mm
*Square Pan : Galvanized steel, 65 x 65 x 7.5 cm
*Thin Box : Alumunium, 60 gr capacity
*Graduated Cylinder : Plastic  made, 1000 ml capacity, single numbering
*Scoop : Cast alumunium, large size, round buttom.
*Trowel : Pointed type, wooden handle.
*Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
*Dimension (l x w x h) : 110 x 70 x 120 cm/ Gross Weight : 200 Kg
*Standard supply with instruction manual books

COMPACTION TEST SET (ASTM D-698/D-1557; T-99/T-280/SNI-03-1742-1989)

For determining moisture - density relationship
Consist of :
*Standard Proctor Mold : Machine steel, plated, 4" i.d., 4.584" height, 2" height of collar
*Modified Proctor Mold : Machine steel, plated, 6" i.d., 4.584" height, 2" height of collar
*Standard Proctor Hammer : Machine steel, plated, 12" drop height, 5,5 lbs weight
*Modified Proctor Hammer : Machine steel, plated, 18" drop height, 10 lbs weight
*Extruder : Steel frame, hydraulic jack
*Square Pan : Galvanized steel 65 x 65 x 7.5 cm
*Thin Box : Alumunium, 60 gr capacity
*Graduated Cylinder  : Plastic  made, 1000 ml capacity, single numbering
*Scoop : Cast alumunium, large size, round buttom
*Trowel : Pointed type, wooden handle
*Straight Edge : Galvanized steel, 300 mm length, for leveling samples in molds
*Rubber Mallet  : Rubber head, 0.5 Kg weight, wooden handle
*Steel Wire Brush : Steel wire, wooden handle
*Dimension (l x w x h) : 62 x 62 x 40 Cm/ Gross Weight : 120 Kg
*Standard supply with instruction manual books

SPECIFIC GRAVITY (VACUUM METHODE) (ASTM D-854 /AASHTO T-100, According SNI 03-6893-2002)

For determining specific gravity of soil sample
Consist of :
*Vacuum Stand : Wooden base, steel pipe column, 2 valves
*Mixing Bow : Stainless steel, round type, 250 mm diameter
*Graduated Cylinder : Glass made, 500 ml capacity, single numbering
*Vacuum Flask : 2000 ml cap, vacuum type, with neck large enough to admit 25 mm aggregate with airtight ground glass stopper
*Vacuum Flask : 1000 ml cap, vacuum type, with tabulation for vacuum hose
*Funnel : Glass, wide mouth
*Wash Bottle : Plastic, 250 ml capacity
*Pipette : Glass, 5 ml capacity
*Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length
*Vacuum Manometer : 4 inch diameter., 0 - 76 cm HG capacity measuring
*Vacuum Pump : Rotary type, 220 V-AC, 1/2 HP, 1 phase
*Dimension (l x w x h) : 70 x 70 x 70 cm/ Gross weight : 45 Kg
*Standard supply with instruction manual books

SPECIFIC GRAVITY (VACUUM METHODE) (ASTM D-854/AASHTO T-100, According SNI 03-6893-2002)

For determining specific gravity of soil sample
Consist of :
*Vacuum Stand : Wooden base, steel pipe column, 2 valves
*Mixing Bow : Stainless steel, round type, 250 mm diameter
*Graduated Cylinder : Glass made, 500 ml capacity, single numbering
*Volumetric Flask : 500 ml capacity, vacuum
*Funnel : Glass, wide mouth
*Wash Bottle : Plastic, 250 ml capacity
*Pipette : Glass, 5 ml capacity
*Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length
*Vacuum Manometer : 4 inch diameter., 0 - 76 cm HG capacity measuring
*Vacuum Pump : Rotary type, 220 V-AC, 1/2 HP, 1 phase
*Dimension (l x w x h) : 70 x 70 x 70 cm/ Gross weight : 45 Kg
*Standard supply with instruction manual books

SPECIFIC GRAVITY & ABSORPTION OF FINE AGGREGATE TEST SET (ASTM C-128/AASHTO T-84)

For determining the water absorption of fine aggregate at saturated surface dry
Consist of :
Cone and Tamper :
Consist of :
*Cone : Brass, 40 mm i.d at the top 90 mm  i.d at the bottom, 75 mm height
*Tamper : Machine steel, galvanized, 340 gr weight, 25 mm diameter
*Mixing Bowl : Stainless steel, round type, 24 cm diameter
*Glass Plate : Glass 10 mm thick, 30 x 30 cm
*Volumetric Flask : 500 ml capacity, heat resistance glass
*Spatula : Stainless  blade, 150 mm length, plastic handle
*Dimension (l x w x h): 40 x 40 x 30 cm/ Gross weight: 7 Kg
*Standard supply with instruction manual books

SPECIFIC GRAVITY (HEATING METHODE) (ASTM D-854/AASHTO T-100)

For determining specific gravity of soil sample
Consist of :
*Hot Plate  : Electric, 1000 Watt, 220 Volt
*Asbestos Wire Gauze  : Asbestos centre, 15 x 15 cm
*Mixing Bow : Stainless steel, round type, 24 cm diameter
*Density Bottle  : Glass made, 100 ml capacity
*Funnel : Glass, wide mouth
*Wash Bottle : Plastic, 250 ml capacity
*Thermometer : Range 0 to 100°C, glass, alcohol indicator, 30 cm length
*Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 10 Kg
*Standard supply with instruction manual books

VACUUM STAND (GMM Vacuum Methode)

*To facilitate evacuation of air from soil/fine aggregate in flask.
*Welded steel frame, vacuum valve, adjustable platen height, provided with vacuum gauge, 0 - 76 cm HG capacity measuring.
*Accommodate 6 flasks  500 ml capacity, vacuum type
*Supplied complete with vacuum pump and flasks
*Dimension (l x w x h) : 120 x 70 x 160 cm/ Gross weight : 80 Kg
*Standard supply with instruction manual books

ELECTRIC SIEVE SHAKER Built- in timer 60 minutes

*220 V-AC, 1/4 HP, 300 Watt, Steel base, cast alumunium pulley, 8inch sieve diameter, 8 pcs sieve capacity
*Built- in timer 60 minutes pulley, 8inch sieve diameter, 8 pcs sieve capacity
*Built- in timer, adjustable 60 minutes timer with automatic shutoff
*Supplied without lid and receiver (Pan Cover).
*Standard supply with instruction manual book
*Dimension (l x w x h) : 50 x 50 x 100 cm.
*Gross Weight : 50 Kg.

MECHANICAL END OVER END SHAKER

*Electric, 220 V/ 50 Hz/ 1 Phase, 50 Rpm.
*Supplied complete with 2 glass jar 1000 ml and rubber bungs.
*Part / used to Hydrometer analysis test set (SO-330A)
*Dimension (l x w x h) : 40 x 60 x 60 cm/ Gross weight : 30 Kg.
*Standard supply with instruction manual books

SIEVE ANALYSIS (COARSE SIEVES) ASTM E-11

For determining grain size distribution of soil particles or sand/ gravel
Brass frame 8" diameter, 70 mm height
Dimension (l x w xh) : 22 x 22 x 6.5
SIEVE 4" : Brass round 8 inch diameter, mesh 101.6 mm opening
SIEVE 3 1/2" : Brass round 8 inch diameter, mesh 88.9 mm opening
SIEVE 3" : Brass round 8 inch diameter, mesh 76.2 mm opening
SIEVE 2 1/2" : Brass round 8 inch diameter, mesh 62.5 mm opening
SIEVE 2" : Brass round 8 inch diameter, mesh 50.8 mm opening
SIEVE 1 3/4" : Brass round 8 inch diameter, mesh 44.4 mm opening
SIEVE 1 1/2" : Brass round 8 inch diameter, mesh 38.1 mm opening
SIEVE 1 1/4" : Brass round 8 inch diameter, mesh 31.7 mm opening
SIEVE 1" : Brass round 8 inch diameter, mesh 25.4 mm opening
SIEVE 7/8" : Brass round 8 inch diameter, mesh 22.2 mm opening
SIEVE 3/4" : Brass round 8 inch diameter, mesh 19.0 mm opening
SIEVE 5/8" : Brass round 8 inch diameter, mesh 15.8 mm opening
SIEVE 1/2" : Brass round 8 inch diameter, mesh 12.7 mm opening
SIEVE 7/16" : Brass round 8 inch diameter, mesh 11.1 mm opening
SIEVE 3/8" : Brass round 8 inch diameter, mesh 9.5 mm opening
SIEVE 5/16" : Brass round 8 inch diameter, mesh 7.9 mm opening
SIEVE 1/4" : Brass round 8 inch diameter, mesh 6.3 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

SIEVE ANALYSIS (FINE SIEVES) ASTM E-11

For determining grain size distribution of soil particles or sand/gravel
Brass frame 8" diameter, 70 mm height
Dimension (l x w xh) : 22 x 22 x 6.5
Gross weight : 0.75 Kg
SIEVE # 4 : Brass round 8 inch diameter, mesh 4.75 mm opening
SIEVE # 8 : Brass round 8 inch diameter, mesh 2.36 mm opening
SIEVE # 10 : Brass round 8 inch diameter, mesh 2.00 mm opening
SIEVE # 12 : Brass round 8 inch diameter, mesh 1.70 mm opening
SIEVE # 16 : Brass round 8 inch diameter, mesh 1.18 mm opening
SIEVE # 20 : Brass round 8 inch diameter, mesh 0.850 mm opening
SIEVE # 30 : Brass round 8 inch diameter, mesh 0.600 mm opening
SIEVE # 40 : Brass round 8 inch diameter, mesh 0.425 mm opening
SIEVE # 50 : Brass round 8 inch diameter, mesh 0.300 mm opening
SIEVE # 60 : Brass round 8 inch diameter, mesh 0.250 mm opening
SIEVE # 70 : Brass round 8 inch diameter, mesh 0.212 mm opening
SIEVE # 80 : Brass round 8 inch diameter, mesh 0.180 mm opening
SIEVE # 100 : Brass round 8 inch diameter, mesh 0.150 mm opening
SIEVE # 120 : Brass round 8 inch diameter,mesh 0.125 mm opening
SIEVE # 140 : Brass round 8 inch diameter, mesh 0.106 mm opening
SIEVE # 170 : Brass round 8 inch diameter, mesh 0.090 mm opening
SIEVE # 200 : Brass round 8 inch diameter, mesh 0.075 mm opening
PAN & COVER : Brass round 8 inch diameter, Receiver with Lid

HYDROMETER ANALYSIS TEST SET (ASTM D-422/AASHTO T-88)

For determining grain size distribution of fine soil sample
Consist of :
*Hydrometer A ( 152 H ) : Glass, stream line, range 0 to 60 gr soil/ ltr
*Hydrometer B ( 151 H ) : Glass, stream line, range 0.995 to 1.038
*Mechanical Stirer : Electric, 220 volt, cast alumunium frame, 10.000 rpm
*Dispersion Cup : Stainless steel cup, 3.75" top diameter, 2.6" bottom diameter, 7" height brass baffles
*Hydrometer Jar Bath : Steel sheet, fibre glass couted, temperature control
Consist of :
*Bath : Steel sheet, fibre glass coated, 60 x 30 x 40 cm
*Water Heater : Electric, range ambient to 40°C
Dispension Agent Consist of  :
*Sodium Hexa : Bottled, powder
*Water Glass : Bottled, liquid
*Hydrometer Jar : Glass, 1000 ml capacity, 2  1/2" diameter approx
*Graduated Cylinder : 1000 ml capacity, glass made, single numbering
*Thermometer : Range 0 to 50°C, glass, alcohol indicator, 30 cm length
*Dimension (l x w x h) : 90 x 50 x 50 Cm/ Gross weight : 50 Kg
*Standard supply with instruction manual books

SHRINKAGE LIMIT TEST SET (ASTM D-427/AASHTO T-92)

For determining shrinkage limit of soil sample
Consist of :
*Prong Plate : 1.6 mm thick hard plastic, 76.2 mm square, 3 stainless steel needles, 0.8 mm dia, 3.2 mm  height
*Monel Shrinkage Dish : Flat bottom; 44.4 mm i.d, 12.7 mm height approx
*Cristalizing Dish : Glass made
Consist of :
*Dish : Glass, 57.2 mm i.d, 12.7 mm height approx
*Overflow Dish : 9 cm dia approx
*Mercury : Bottled
*Glass Plate : Glass 10 mm thick, 30 x 30 cm
*Thin Box : Alumunium, 60 gr capacity
*Graduated Cylinder : Glass made,100 ml capacity,single numbering
*Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
*Spatula : Plastic handle, stainless  blade, 150 mm length
*Scraper : Plastic handle, stainless blade, 100 mm length
*Dimension (l x w x h) : 10 x 10 x 30 Cm/ Gross weight : 6 Kg
*Standard supply with instruction manual books

PLASTIC LIMIT TEST SET (ASTM D-4318/AASHTO T-90)

PLASTIC LIMIT TEST SET  (ASTM D-4318/AASHTO T-90)
For determining plastic limit of soil sample
Consist of :
Plastic Limit Plate : glass made
Consist of :
*Reference Rod : Stainless steel rod, 3.2 mm diameter
*Glass Plate : Glass 10 mm thick, 30 x 30 cm
*Thin Box : Alumunium, 60 gr capacity
*Graduated Cylinder : Glass made,100 ml capacity,single numbering
*Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
*Spatula : Plastic handle, stainless  blade, 150 mm length
*Scraper : Plastic handle, stainless blade, 100 mm length
*Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 5 kg
*Standard supply with instruction manual books

LIQUID LIMIT TEST SET (Electric) (ASTM D-4318/AASHTO T-89/SNI 03-1967-1990)

For determining liquid limit of soil sample
Consist of :
*Liquid Limit Device : Electric, 220 V-AC, brass cup, hard rubber base, provided with counter
*ASTM Grooving Tool : Machine steel, head gauge
*Cassagrande Grooving Tool : Brass plate
*Thin Box : Alumunium, 60 gr capacity
*Glass Plate : Glass 10 mm thick, 30 x 30 cm
*Graduated Cylinder : Glass made,100 ml capacity,single numbering
*Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
*Spatula : Plastic handle, stainless  blade, 150 mm length
*Scraper : Plastic handle, stainless blade, 100 mm length
*Dimension (l x w x h) : 40 x 40 x 40 cm/ Gross weight : 7 kg
*Standard supply with instruction manual books

IMIT TEST SET (Hand Operated) (ASTM D-4318/AASHTO T-89/SNI 03-1967-1990)

For determining liquid limit of soil sample
Consist of :
*Liquid Limit Device : Hand Operated, brass cup, hard rubber base, provided with counter
*ASTM Grooving Tool : Machine steel, head gauge
*Cassagrande Grooving Tool : Brass plate
*Thin Box : Alumunium, 60 gr capacity
*Glass Plate : Glass 10 mm thick, 30 x 30 cm
*Graduated Cylinder : Glass made,100 ml capacity,single numbering
*Evaporating Dish : Heat resistance porcelain, 12 cm dia, 250 ml capacity
*Spatula : Plastic handle, stainless  blade, 150 mm length
*Scraper : Plastic handle, stainless blade, 100 mm length
*Dimension (l x w x h) : 24 x 26 x 23 cm/ Gross weight : 4 kg
*Standard supply with instruction manual books

TVA PENETRATION

Widely used in analyzing soil surface.
Consist of :
*Penetration Rod and Chamber : Steel pipe, 65 cm length with hydraulic chamber
Consist of :
*Penetration Rod : Round bar, 40 cm length
*Hydraulic Chamber : Machine steel, 100 kg capacity
*Penetration Needle : Machine steel, hardened, tip 0.5, 1.0, 2.0, 3.0, sq. Cm
Cross section area
*Holder : Alumunium handle
*TVA Manometer : 100 kg capacity
*Carrying Case : Wooden case
*Open End Wre

FIELD CBR TEST SET (CBR Lapangan) ASTM D-4429; According SNI 03-1738-1989

For determining CBR value on place
Consist of :
*Mechanical Jack : Cast alumunium housing, 5 tons cap, hand operated, 2 speeds
*Swivel head : Cast alumunium
Field Penetration Piston Consist of :
*Penetration Piston : Machine steel, galvanized, 1.954" piston diameter
*Extention set : Machined steel, plated, 5 cm, 10 cm, 20 cm, 30 cm, and 60 cm, provided with connecting adaptor
*Reference Beam : Steel pipe, 150 cm span include with two stand
*Circular Surcharge Weight : Machine steel, plated, 10" dia, 10 lbs weight
*Slotted Surcharge Weight : Machine steel, plated, 8" dia, 10 lbs weight.
*Slotted Surcharge Weight : Machine steel, plated, 8.5" dia, 20 lbs weight
*Proving Ring : 2000 lbs capacity, Calibration & certified KAN LK-011-IDN
*Proving Ring : 10,000 lbs capacity, Calibration & certified KAN LK-011-IDN
*Dial Indicator : Range 30 x 0.01 mm
*Dial Holder : Chrome plated shaft with sample clamping device, powerfull magnet with on-off switch.
*Standard supply with :
- Instruction manual books
- Calibration certificate KAN LK-11-IDN
*Dimension (l x w x h) : 140 x 35 x 35 cm/ Gross weight : 75 kg

PROVING RING PENETROMETER

For determining penetration resistance of soil layers
Consist of :
*Penetration Rod : Round bar, 51.5 cm/49 cm length with 5 cm increment lines.
*Penetration Cone : Machine steel, hardened, plated, 1 sq. in cross section area, 30 deg. angle.
*Holder : Alumunium handle
*Carrying Case : Woodden case
*Proving Ring : 100 kg capacity, (Calibration and certified KAN LK-011-IDN)
*Open End Wrench : Vanadium steel
*Dimension (l x w x h) : 65 x 35 x 20 cm/ Gross weight : 10 kg
*Standard supply with instruction manual books

PLATE BEARING TEST SET (ASTM D-1194 / AASHTO T-235 )

For determining ultimate bearing capacity of soil on place by means of field loading test
Consist of :
*Hydraulic Jack : 30 tons capacity, manometer read,out, hand oparated
*Manometer : 6" diameter, 30 tons capacity, 0.5 tons,increment
*Hydraulic Cylinder : 30 tons capacity
*Hydraulic Hand Pump : Double action, 10.000 psi capacity
*Hydraulic Hose : 10.000 psi, 180 cm length
*Reference Beam : Steel pipe, 2 x 150 cm span
*Circular Bearing Plate : 6" diameter, machined steel, 1" thick
*Circular Bearing Plate : 10" diameter, machined steel, 1" thick
*Circular Bearing Plate : 12" diameter, machined steel, 1" thick
*Circular Bearing Plate : 18" diameter, machined steel, 1" thick
*Circular Bearing Plate : 24" diameter, machined steel, 1" thick
*Circular Bearing Plate : 30" diameter, machined steel, 1" thick
*Square Bearing Plate : 12" x 12", machined steel, 1" thick
*Dial Indicator : Travel range 30 x readibility 0.01 mm
*Dial Holder : Chrome plated shaft with sample clamping device powerfull magnet with on-off switch
*Dimension (l x w x h) : 150 x 80 x 80 Cm/ Gross weight : 300 Kg
*Standard supply with instruction manual books

DYNAMIC CONE PENETROMETER / DCP

For determination of field CBR value (rapid quality control)
Consist of :
*Handle : Stainless steel
*Hammer : Machined steel, Painted, 8 kg weight
*Guide Rod : Stainless steel, 16 mm diameter, drop height 575 mm
*Anvil : Machined steel, welded painted
*Penetration Rod : Stainless steel, 16 mm dia, 107 cm length, 75 cm effective
*Cone : Hardened tool steel cone tip, 60 deg. angle, 20 mm dia., stainless steel adaptor
*Penetration Scale : Stainless steel, 16 mm dia, 100 cm scale
*Carrying Bag : Water proof cloth
*Open End Wrench : Vanadium steel 12/13, 14/15
*Dimension (l x w x h) : 115 x 40 x 40 cm/ Gross weight : 18 Kg
*Standard supply with instruction manual books

DRILLING RIG MACHINE WITH SPT (Standard Penetration App)

 DRILLING RIG MACHINE WITH SPT (Standard Penetration App)
This machine a powerful, rugged, and modular drilling machine with unlimited mobility.
It uses a hydraulic system to move the drilling components. Skid Mounted with knock down assembly, is suitable for use on drilling in areas that are difficult to reach. Capable for drilling to a depth of 100 meters
A DR-100JC  DRILLING RIG (JACRO 100 RIG)
Detail  Specification :
- Drilling capacity : 100 metre
- Skid Mounted with knock down assembly
- Hydraulic system, driving rig with gearbox
- Pull up / Down by chain, driven by hydraulic motor
- Driven by Diesel engine 22 HP (Starter)
- Pressure gauge : 160 Kg/ cm2
B DR-100PS  POWER SPRAYING
Detail  Specification :
- Spraying pressure :  50 Kg/cm2
- Speed : 400 - 700 rpm
- Water suction :  76 - 133 L/min
- Powered : diesel engine 12 HP
- Supplied c/w spraying hose 1 inch dia, 15 metre length
C DR-100WP  WATER PUMP
Detail  Specification :
- Spraying pressure : 20 - 30 Kg/cm2
- Speed : 300 - 600 rpm
- Water suction :  22 - 59 L/min
- Powered : diesel engine 10 HP
- Supplied c/w Water hose 3/4 inch dia, 100 metre length
D DR-100AC  DRILLING ACCESSORIES for 100 Metre Drilling Depth :
Detail  Specification :
- DR-100.1AC  Drilling Rod : Φ 42 mm  x 1.5 metre length
- DR-100.4AC  Cassing Pipe (NW) : Φ 89 mm  x 3 metre length
- DR-100.7AC  Single Core Barrel : Φ 73 mm  x 1.5 metre length c/w bit tungsten
- DR-100.8AC  Cassing Head (NW): 89 mm diameter x 15 cm
- DR-100.9AC  Cassing Bit : 89 mm diameter x 15 cm
- DR-100.10AC  Cassing Clamp : 89 mm diameter x 40 cm
- DR-100.23AC  Core Bit (NQ) : Diamond core bit, 73 mm diameter
- DR-100.25AC  Wing Bit : Tungsten bit, 73 mm diameter
E SO-130AC  STANDARD PENETRATION TEST
Detail  Specification :
- SO-100.17-1  Hammer : Machine steel, 63.5 kg weight, Automatic Drop
- SO-100.17-2  Rod head : Machine steel
- SO-100.17-3  Anvil : Machine steel
- SO-100.17-4  Guide Rod : 42 mm diameter x 1.5 m
- GE-100.26-3  Frame of Tower: 300 cm heigh, heavy duty frame
- Hoisting swivel (AW)
F GE-960TK  TOOLS KIT - Pipe wrench 24 inch
- Pipe wrench 36 inch
- Adjustable wrench 8 inch
- Screwdriver + / -
- Tool-box

HYDRAULIC CONE PENETROMETER / Sondir Hidrolik 5 Ton Capacity

ASTM D-3441 / SNI 2827-2008
For determining cone resistance and friction resistance of soil layers
Terdiri dari :
*Hydraulic Driving Appliance : Steel construction, hydraulic operated 5 Ton Capacity Single cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges. The trailer is suitable for towing behind a truck
SO-211HD Driving Appliance * Manometer : 60 kg / cm² capacity, lower mount connection.
*Manometer : 500 kg / cm² capacity, lower mount connection
*Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 9 HP, hand starter
GE-710A Field Troley * Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length tappered thread
*Plunger Rod : Round bar, 15 mm dia, 1 mtr length
*Adaptor Consist of : Push Adaptor, Pull Adaptor
*Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets 1.2 metre length
SO-205.2A Hydraulic Spanner * Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare
*Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter
*Friction Cone : Precision machine steel hardened, with friction jacket tappered thread 60º angle, 35.7 mm diameter
*Wrenches Set
*Long Fasten Press : Beam cannal, 150 cm length, 12 cm width
*Hydraulic Hose : Flexible hose with push/ pull coupler 250 cm length, 10.000 psi capacity
*Field Trolley : Fillin sounding apparatus (replacing SO-202A; SO-203A; SO-205A; SO-219.1; GE-699A)
*Standard supply with instruction manual books
*Dimension (l x w x h) : 130 x 95 x 210 cm
*Gross Weight : 690 kg

DUTCH CONE PENETROMETER / Sondir 5 Ton Capacity (ASTM D-3441 / SNI 2827-2008)

DUTCH CONE PENETROMETER / Sondir 5 Ton Capacity (ASTM  D-3441 / SNI 2827-2008)
For determining cone resistance and friction resistance of soil layers
Consist of :
*Press-In Apparatus : Steel construction, manually operated 5 tons capacity.
*Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
*Plunger Rod : Round bar, 15 mm dia, 1 mtr length
*Adaptor :
*Push Adaptor Machined steel.
*Pull Adaptor Machined steel.
*Spiral Anchor
*Spiral Anchor : Machined steel, welded 1.5 m length
*Handle And T-piece : Machined steel, welded
*Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter
*Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
*Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) 1 set allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1).
*Fasten press Long Fasten Press Short Fasten Press Manometer 
*Fasten press : Beam Cannal
*Long Fasten Press : 1.8 m length, 12 cm width
*Short Fasten Press : 1.2 m length, 15 cm width
*Manometer : 60 kg/ cm² cap, single pointer, 6" dia, lower mount connection (Calibration and certified KAN LK-011-IDN)
*Manometer  : 500 kg/ cm² cap, single pointer, 6" dia, lower mount connection (Calibration and certified KAN LK-011-IDN)
*Dimension (l x w x h): 220 x 120 x 80 cm/ Gross weight: 500 kg
*Standard supply with instruction manual books

CORPS OF ENGINEER SOIL SURFACE SAMPLER (ASTM D-2937)

For determining soil density in place
Consist of :
*Hammer :
- Machine steel, plated, 10 lbs
- sliding weight : 27 1/4" falling height
*Sampling Tube :
- Machine steel, plated, 3" o.d.,
- 2-7/8" i.d., 2-13/16" length
- Standard supply with instruction manual operating
- Dimension (l x w x h) : 25 x 25 x 100 cm
- Gross Weight : 35 kg

ELECTRIC SAMPLE EXTRUDER

For extruding soil speciment from 68 mm dia sampling tube (hand boring part SO-117), electric, 220 Volt, 750 Watt, 1 Phase.
*Supplied without sampling tube
*Standard supply with instruction manual operating
*Dimension (l x w x h) : 40 x 50 x 130 Cm
*Gross weight : 60 Kg

STANDARD PENETRATION TEST

ASTM D-1586  /  AASHTO T-206
For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration.
Consist of :
Split Barrel Sampler : Hardened machined steel, 1 3/8" I.d; 18" length
Sampling Rod : Steel pipe, 44 mm (1 3/4") diameter, 1.5 m length
Drive weight Assembly Consist of :
Hammer : Steel, 63.5 kg weight, 8" diameter, 240 mm height
Anvil : Machine steel, 6" diameter, 150 mm height
Guide Rod : Steel, 76.2 cm drop height
Tripod Assembly Consist of :
Tripod Stand : Steel pipe 71 mm dia # 2.5 mm, 6 metre standing
Pulley : 20 cm diameter
Rope : Manila rope, 3/4 diameter x 15 metre
Vertical Guide : Machine steel, 160 mm dia, 45 mm hole dia
Pipe Wrench : 24'' length
Dimension (l x w x h) : 330 x 60 x 60 Cm/ Gross weight : 445 Kg

SAMPLE EXTRUDER

For extruding soil speciment from 68 mm dia sampling tube (hand boring part SO-117), welded steel, screw type.
*Supplied without sampling tube.
*Standard supply with instruction manual operating
*Dimension (l x w x h) : 125 x 15 x 25 Cm
*Gross weight : 45 Kg

Alat Pembagi Sample Tanah

*Alat Pembagi Sample Tanah
*Soil devider: Alat pembagi sample tanah menjadi dua bagian yang sama.

HAND BOR (Soil Sampling Apparatus)

Drilling for soil sampling preparation 
*Drilling Rod : Solid bar, 1 m length, 1 1/4" dia
*Iwan Type Auger : Welded steel, two radial blades, 4" dia
*Straight Choping Auger : Steel bar, hardened tip, 45 mm width
*T-Piece : Welded steel
*Tube Adaptor : Machine steel, with 3 clamping bolts
*Turning Rod : Machine steel, 1 1/4" dia, 60 cm length
*Sampling Tube : 68 mm dia, 40 cm length, with 3 bolt holes
*Rod Head : Hardened, machined steel, 2 1/2" dia
*Parafin : Parafin
*Vertical Guide : Machine Steel
*Allen Key : Hardened steel, 1/4''
*Pipe Wrench : 24" Wrench
*Hammer : Steel, 5 kg weight, wooden handle
*Steel Wire Brush : Wooden handle, for cleaning laboratory/field apparatus
*Dimension (l x w x h) : 105 x 60 x 60 cm/ Gross weight : 130 Kg
*Standard supply with instruction manual books

Bor Tanah - kedalaman 10 meter

Bor Tanah - kedalaman 10 meter
*Drilling Rod, Solid bar, 1mtr length, 1 1/4" dia 10 Pcs
*Auger Head, Welded steel, two radial blades, 4" dia 1 Pc
*Straight Chopping Auger Steel bar,hardened tip, 45 mm width 1 Pc
*T-Piece Welded steel 1 Pc
*Tube Adaptor, Machined steel, with 3 clamping bolts 1Pc
*Turning Rod, Machined steel, 1 1/4" dia, 60 cm length 2Pcs
*Sampling Tube, 68 mm dia, 40 cm length with 3 bolt holes 10 Pcs
*Rod Head, Hardened, machined steel, 2 1/2" dia 1 Pc
*Allen Key, Hardened Steel, 1/4" 1 Pc
*Pipe Wrench, 24" length 2 Pcs
*Hammer5 kg weight, 1 Pc
*Steel Wire Brush, Wooden Handle 1 Pc

Soil Color Book

Munsell Soil Color Book
*This revised edition features the same colors available in previous books plus additional color charts.
*Included are a 10Y and 5GY soil chart for glauconite soils, a 5R soil chart for Australia and Southeast Asia, and a 7.5R soil chart for tropical and semi-tropical soils.
*A Munsell high value, low chroma “white” page shows half steps from 8.5 to 9.5 in value with chromas of 1 and 2 for N, 7.5YR, 10YR, and 2.5Y.
*Use this page to describe carbonate, silica, gypsum, and soluble salt precipitates and evaporites common to arid and semi-arid environments as well as very light-colored parent materials such as diatomaceous earth and volcanic ash.
*The book’s light gray pages decrease sun glare. The color chips are recessed into each water-resistant page to allow dirt and debris to be wiped off easily with less effect on the color chips.
*Chart Size: 6” x 8”.

Portable Area Meter

Alat Ukur Luas Lahan
*Application: can test farmland, green land, forest, water area, tidelands and so on regular and irregular area.
*Range: 500-9,999,999 m²
*Range 0-999,999.9 m
*Test unit: meter, square meter & Chinese acre
*Stored datum: 200 Groups
*RS-232 link with computer by software
*Battery: 6V

Geolistrik

Naniura NRD 300 HF
Untuk mengetahui kandungan mineral, air, batuan dalam tanah
Transmitter:
*Power supply  DC in : 12  Volt, min. 6 AH (Max. power : used battery accu )
*Power Output : 300 Watt for > 20 A
*Output Voltage : 500  V maximum  ; Output Current : 2000 mA maximum
*Current accuracy : 1 mA ; Reading Type : Digital
*Power for Digital Meter : 9 Volt, dry battery
*Reading Facility : Current loop indicator
Receiver:
*Input Impedency : 10 M-ohm
*Range : 0.1 mV up to 500 Volt
*Accuracy : 0.1 mVolt
*Compensator Smooth : 1 x turn (wire wound resistor)
*Compensator Rough : 10 x turn (precision multi Turn potensiometer)
*Reading : Digital (auto range)
*Reading Facility : HOLD (data memory)
Compesator
*Transmitter : 1 unit
*Receiver : 1 unit
*Current Cable @500 meter : 2 roll
*Electrode Potential (copper) : 2 pcs
*Current Electrode (Stainless) : 2 pcs
*Accu 12 Volt, 12 Ampere : 1 unit
*Potential Cable 2 x  100 meter
*Cable Connector
*User Manual Book